Grain Hopper Tanks

High tensile steel sidewall sheets,
galvanized coating
2-2/3” (68mm) wide by 1/2” (13mm) deep corrugation
precision formed panel.
access via an optional fully die-formed side ladder with dimpled non-skid rungs.

rollformed, fully galvanized 6-bend legs
Roll-formed cross ties
two-piece leg anchor sections,
galvanized,

Wet holding bins are available in 7’, 9’,12’, 15’, 18’ and 21’ diameters
can be used for temporary storage,
adapted to several grain drying and conditioning systems,
can serve as long term storage for properly dried grain.
hopper tanks designed to hold 45 lbs. per cubic foot,
total bin capacities exceeding 150 metric tons (or over 6000 bu.).
45 degree hopper slope provides optimum material flow for unloading
rounded truss head bolts reduce “bridging” of contents on inner surfaces.
Optional view window level indicators for convenient monitoring of grain loading and unloading.

high tensile, galvanized steel.
up to 20% more strength, with no extra weight,
Roof eave clearance can be adjusted at time of installation.
Each roll formed roof rib has four supportive bends in the vertical sides for maximum strength.
Tall roof ribs are fully double overlapped for moisture resistance and increased strength.
The easy to open peak cap provides a large 30” diameter opening for fast filling.

Tank hoppers are available in three slopes:
45°, for dry, free flowing grain
60° or
67° for harder flowing materials.
Hopper panels are die-formed with rounded corners and sealed edges down-turned for a weather-tight fit.
assembly with rounded, truss-head bolts reduces “bridging” of contents on inner surfaces.
The “eave”, the upper edge where the hopper is joined to the sidewall, is die-formed to conform to the
shape of the sidewall corrugation

steeper (60° and 67°) hopper slopes and sealed roofs available for your ground feed handling needs.

Warning! Non-free flowing materials including (but not limited to) soybean meal and meat by-products should not be stored in these tanks due to their inherent nature to bridging. Check with your material supplier on the flowability of your product prior to purchasing a tank. If in doubt about a specific product, contact Grain Systems’ engineering department for additional recommendations. Some features are optional and may be available only on certain models. Consult your local GSI dealer for details. All specifications subject to change without notice.

View Specs Here

Hopper Tank Complete Spec Sheet

Picture 1	Picture 2	Picture 3
Picture 4	Picture 5	Picture 6
Picture 7	Picture 8	Picture 9
Picture 10	Picture 11