ground feed,
crumble feed,
mash,
high moistures corn,
shelled corn or
pellets,
Tubing:
Available in specially formed elbows with increased wall thickness on the elbow for strength and wear resistance.
For corn up to 27% moisture and other hard to flow materials, the Flex-Flo™ High Roughage system utilizes a combination of a Model 300 (75mm) auger in a Model 350 (90mm) tube.
For pelleted feeds, a specially designed auger is available for Model 300 Flex-Flo™, which increases the tolerance between the tube wall and auger. This increased tolerance prevents auger plugging and damage to expensive pelleted feeds.
PVC tubing is capable of spanning distances of up to 150' with most models and 250' with the 220 Model
Auger
Driven by a 1/3 to 1-1/2 horsepower,
totally enclosed,
fan cooled motor at a standard 358 RPM
(other speeds are available for special applications).
drive system includes an easily accessible maintenance port
safety back-up switch
automatic thermal shutoff switch
All electrical connections are made in a plastic, water resistant control box.
extension hoppers are available that can expand the delivery range to practically any distance and can provide access at 90 degrees from the main line.
AP Flex-Flo™ Specifications
| Model |
Tube
Diameter
O.D.
|
Tube
Corner
Radius
|
Maximum
Single System
Length
|
Motor
Sizes
at Max.
Length
(Horsepower) |
Capacity
(lbs./minute
at 40 lbs.
per cu. ft.) |
Max.Extension
Length (at
Motor end of
first system) |
| 220 |
2-1/4" |
5'
/ 10' |
250' |
1/2 |
15 |
300 |
| 300 |
3" |
5' |
200' |
1 |
50 |
240 |
| HR |
3-1/2" |
5' |
150' |
1 |
50 |
180 |
| 350 |
3-1/2" |
5' |
150' |
1 |
100 |
180 |
| 500 |
5" |
6' |
*150' |
1-1/2 |
220 |
*180 |
| *For
high moisture corn, reduce system length by 50%. |
Picture 1 |
Picture 2 |
Picture 3 |
Picture 4 |
Picture 5 |
Picture 6 |
Picture 7 |
Picture 8 |
|
If you would like to be notified when a new listing is posted, please enter your email below.
