10-hl Brewhouse Brewing System

Note: If you have chosen the stainless steel version of this system, all copper items will be replaced by highly polished SUS 304 stainless steel.

Skid-Mounted Brewhouse
1. 3 Brewkettle/Mash Tun

• Gross volume: 1300L Available volume: 1000L
• Heating method: steam heating
• Outer solid copper dome, highly polished
• Inner dome: SUS304 stainless steel plate, 3mm thick, internal polished
• Lower external vessel body: copper cladding on SUS 304 stainless steel
• Accessories include manway, spray ball, spray pipe, lower agitator, reduction gear, motor and temperature gauge, inner heater (if needed).
• Body: insulated with rockwool.

1.4 Lauter Tun & Whirlpool Combi Vessel
Dual tank vessel:
The upper vessel is the lauter tun

• Outer solid copper dome, highly polished
• Inner dome: SUS304 stainless steel plate, 3mm thick
• External vessel body: Solid copper cladding on SUS 304 stainless steel

The lower vessel is the whirlpool

• The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
• Body insulation with rock wool for heat preservation.

1.4.1 Lauter Tun:

• Gross volume: 1300L, available volume: 1000L,
• Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe.

1.4.2 Whirlpool

• Gross volume: 1300L, available volume: 1000L,
• Equipped with manway, spray ball and spray pipe.

1.5 Plate Heat Exchanger

• Cooling area: 5m2
• Made of SUS316

1.6 External Vent Stacks

• Specification: ?300x4m (two pieces)
• Made of copper plate, processed carefully, matched to the mash tun and brew kettle.
• The external exhaust is equipped with one vapor fan.

1.7 Wort Oxygen Device

• Made of SUS304 stainless steel and titanium, internal polished
• External is made of stainless steel, polished.
• Includes inlet and outlet of mash, sterile oxygen port (mix sterile oxygen with mash fully), with titanium stick.

1.8 Yeast additive device

• Volume: 10L
• Made of imported SUS304 stainless steel carefully, internal polished
• External is made of stainless steel, polished.
• Includes three connection ports: additive yeast port (with sight glasses), sterile air port (sterile air filter) and mash pipe connection port, with one double metal temperature gauge.

1.9 Brix measuring unit

• Columniform style
• External canister is with input water port, overflow water port an drain outlet
• Connected to the frame of the brewhouse.
• Made of SUS304 stainless steel, internal polished,
• External copper cladding is highly polished.

1.10 Workstation and staircase

• The frame is made of square stainless steel of 100*50,with guide rail and handrail.

1.11 Pump, pipe, valve

• 1.5 HP wort pump, sanitation grade

Fermentation System

2.1 Cylindrical-conical fermentation tanks
Gross volume: 1200L Available volume: 1000L
Cooling means: jacket cooling
Coolant medium: glycol

• Inner and outer of the tank are all made of SUS304 stainless steel, the internal side polished, the external is polished by auto-polishing machine.
• Stainless steel dimple plate glycol cooling jacket
• Internal tank is 3mm
• The external cladding is 2mm.
• On the bottom there is a 2” t/c drain, on the top there is an exhaust and CIP port, coolant in and coolant out pipe.
• The tank body is equipped with manway, sample cock, temperature sensor, spray pipe, CIP sprayball, pressure gauge and butterfly valves etc.

2.2 Fermentation auto-control Ranco controllers and Honeywell motorized ball valves

• Quantity: Determined by number of tanks

2.3 Portable CIP/Beer Transfer Pump

• 1HP, 3450 RPM washdown
• Steel cart

Serving/Bright/Conditioning Tanks

6.1 Serving tank (Jacketed BBT version)
Gross volume: 1200L Available volume: 1000L
Inner and outer hull are all made of SUS304 stainless steel, polished

• The thickness of the internal stainless steel hull is 3mm
• The thickness of the external plate is 2mm
• The beer in the tank body is cooled off by means of stainless steel dimple plate
• On the bottom there is an entrance; on the top there is an exhaust and CIP port, coolant in-out pipe.
• The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
• Quantity:

6.1 Serving tank (Single shell SST version for use in walk-in cooler) Gross volume: 1200L Available volume: 1000L

• Made of SUS304 stainless steel, polished
• The thickness of the tank wall is 3mm
• On the bottom there is a t/c outlet; on the top there is an exhaust and CIP port, coolant in-out pipe.
• The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
• Quantity:

System Pricing
Please note that due to the highly volatile state of the 304 stainless steel market, all pricing is subject to change without prior notice. No order is deemed to be final until ABT has received a written purchase order and full deposit payment from the Buyer.

Stainless Steel Brewhouse Price (Electric): $56,400
Stainless Steel Brewhouse Price (Steam): $60,200
Copper Brewhouse Vessels Option: $8,000
Note: For the steam brewhouse you will also need to add a steam boiler system; either your own, or the unit listed below in the Options section.

C.E. Certification of Control Panel & Pump Motors: $5,000
Note: For customers in the European Union our brewhouse control panel and pump motors will either be built in Europe, or supplied by a C.E. certified manufacturer. ABT tanks and vessels are not C.E. certified. European customers should contact us to discuss delivery options.

Tank Pricing
FV = Fermentation Tank (Cone-Bottom)
BBT = Bright Beer/Conditioning Tank (Jacketed with dish-bottom)
SST = Single Shell Tank (Non-jacketed with dish-bottom)

10-hl FV: $9,200 each
20-hl FV: $12,150 each
10-hl SST (Single Shell): $6,300 each
20-hl SST (Single Shell): $7,300 each
10-hl BBT: $9,400 each
20-hl BBT: $12,225 each
Temp. Controller & Motorized Ball Valve: $250 per jacketed tank
Freight: To Be Determined*

Options
RAD Malt Mill & Grain Handling System
Malt Mill

• Capacity: 200Kg/h
• Double-roller
  - 1HP, 3450 RPM motor

Grain Handling System

• 20-ft flex auger
• 0.5HP motor
• Manual dump grain hopper $5,900

Glycol Cooling System
3.1 Aqua Products 5-ton Glycol Chiller Package

• Model C-DCP-060B
• R-40A
• Includes integral glycol tank and pump $7,400

Steam Boiler System
L.E.S.-Aldrich Series HF Scotch Box Boiler,
Model HFC-0800-SG

• 23.8 HP
• Three pass design
• 975 MBH input/800 MBH output
• McDonnell & Miller #157 comb. low water cutoff/pump control
• Honeywell RW700B probe type manual reset second low water cutoff
• Powerflame Gas Burner, model J30A-10, 1/3 HP 115v/60/1PH
• Four signal lights: power on, main fuel, low water and flame failure
• 1” dual gas valves - one diaphragm and one solenoid
• Pre-piped and wired gas train
• On-off firing sequence
• Honeywell R7795A/FR flame safeguard – Meets UL795, FM and ASME code requirements
• Indirect hot water coil: 675 GPG @ 50° to 150° F. w. 0.75”
• 3-way mixing valve
• Shipping weight: 1,625 lbs.

Shipco Model 30 EMV Simplex Boiler Feed Unit

• 30-gallon receiver
• One bronze fitted flange-mounted centrifugal pump
• 15 GPM @ 20 PSIG, 0.33 HP
• 115/230v/1PH
• NEMA 1 contactor w/H-O-A switch and running light
• 0.5” make-up solenoid
• Make-up water level switch
• “City of Chicago Approved” air gap assembly
• Shipping weight: 180 lbs. $19,000

Beer Filter

• 40 x 40cm Plate & Frame Sheet Filter $4,500

Miscellaneous

• 100-ft/3 m plicord beer hose, 1.0”
• Lot of hose camps and fittings
• Basic laboratory glassware set, hydrometer
• One (1) 6” stainless steel carbonation stone $3,500

Installation Supervision: $10,000*
* Includes all travel expenses for installation supervisor and installation supervision for a period of up to ten workdays. Customer is responsible for site preparation as per ABT’s instructions, and for supplying trade and manual labor and moving equipment as needed and directed by ABT Installation Supervisor.

Freight: To Be Determined** ** The brewhouse will take up one half of a 40-foot shipping container. The final number of shipping containers needed will be determined by the selection of optional equipment and the number and size of the tanks chosen.

Terms of Sale

• Payment terms are 50% with order, balance at shipment of main equipment.
• Shipment will be approximately 14-16 weeks from receipt of deposit and approval of tank and vessel drawings.
• Delivery will take approximately 25-28 days, door-to-door.
• All ABT tanks and equipment come with a one year limited warranty on parts and labor.

Picture 1	Picture 2	Picture 3
Picture 4	Picture 5	Picture 6
Picture 7	Picture 8	Picture 9
Picture 10	Picture 11

Leasing is available!

Click here for more information.
Click here for the on-line leasing application.