New ABT 3.5-barrel/4-hectoliter Electric-Heated Brewhouse with 3.5-bbl Tanks

I Skid-Mounted Brewhouse
Brewkettle/Mash Tun

• Gross volume: 4.5-bbl Available volume: 3.5-bbl
• Heating method: Electric zone heating elements
• Outer SUS304 stainless steel dome, highly polished
• Inner dome: SUS304 stainless steel plate, 3mm thick, internal polished
• Lower external vessel body: SUS 304 stainless steel
• Accessories include manway, spray ball, spray pipe, lower agitator, reduction gear, motor and temperature gauge, inner heater.
• Body: insulated with rockwool.

  Lauter Tun & Whirlpool Combi Vessel
  Dual tank vessel:
  The upper vessel is the lauter tun

  • Outer SUS304 stainless steel dome, highly polished
  • Inner dome: SUS304 stainless steel plate, 3mm thick
  • External vessel body: SUS 304 stainless steel
    The lower vessel is the whirlpool
  • The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
  • Body insulation with rock wool for heat preservation.

  Lauter Tun:

  • Gross volume: 600L, available volume: 500L,
  • Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe.

  Whirlpool

  • Gross volume: 600L, available volume: 500L,
  • Equipped with manway, spray ball and spray pipe.

  Plate Heat Exchanger

  • Cooling area: 5m2
  • Made of SUS316

  Workstation and staircase

  • The frame is made of square stainless steel of 100*50,with guide rail and handrail.

  Pump, pipe, valve

  • 1.5 HP wort pump, sanitation grade

  Brewhouse Price: $47,000 USD

  3.5-bbl/4-hl Fermentation Tanks

  Cylindrical-conical fermentation tanks
  Gross volume: 4.2-bbl. Available volume: 3.5-bbl
  Cooling means: jacket cooling
  Coolant medium: glycol

  • Inner and outer of the tank are all made of SUS304 stainless steel, the internal side polished, the external is polished by auto-polishing machine.
  • Stainless steel dimple plate glycol cooling jacket
  • Internal tank is 3mm
  • The external cladding is 2mm.
  • On the bottom there is a 2” t/c drain, on the top there is an exhaust and CIP port, coolant in and coolant out pipe.
  • The tank body is equipped with manway, sample cock, temperature sensor, spray pipe, CIP sprayball, pressure gauge and butterfly valves etc.
  
  Quantity: Eight (8)
  Tank Price: $5,700 each

  Serving Tanks
  Serving tank (Single shell SST version for use in walk-in cooler)
  Gross volume: 4.2-bbl Available volume: 3.5-bbl

  • Made of SUS304 stainless steel, polished
  • The thickness of the tank wall is 3mm
  • On the bottom there is a t/c outlet; on the top there is an exhaust and CIP port, coolant in-out pipe.
  • The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
  
  Quantity: Five (5)
  Price: $3,800 each

  Location: Chicago, IL U.S.A.
  Notes: New equipment, still under manufacturer's warranty.

  Picture 1	Picture 2	Picture 3
  Picture 4	Picture 5

  ---

  If you would like to be notified when a new listing is posted, please enter your email below.

  North American Brewing Services Newsletter
  *  Your email address:
  *  Preferred Format:	HTMLText
  *  Confirmation:	On Off
  *  Enter the security code shown:

  
  

  ---