New Listings | Complete Breweries | Brite Beer Tanks | Brewhouses | Misc
Fermentation | Filtration | Packaging Equipment | Refrigeration | Malt Handling

Pasteurizing Tunnel

The pasteurizer is a fully modular unit, providing for ease of installation and allows for easy expansion as capacity increases.
The unit is all stainless steel construction. All exterior surfaces are 2B finish.
All legs are adjustable (±3") for easy leveling.

CONVEYING SYSTEM
The straight through flow guarantees minimum maintenance due to the few moving parts and limited loss of valuable production time.
Sumitomo gearmotor attached to a 2.5” square shaft, with movable belt sprockets.

SPRAY SYSTEM
The spray system consists of stainless steel headers with square pattern nozzles in the pasteurizer area and PVC headers in the cooler. Spray headers are designed to provide an even spray pattern over the containers. Nozzles are high flow and have large openings to reduce the quantity of nozzles required and also serves to eliminate plugging.

PASTEURIZER SYSTEM
The containers are sprayed with deluge nozzles to assure complete and even coverage.
Each heating zone is controlled with senser probes to give accurate temperature readouts.
Recirculating water is pumped through a steam-to-water heat exchanger entering the spray header.

WATER RECIRCULATION SYSTEM
Pumps are Berkeley close coupled, centrifugal, operating at 81% efficiency.
Each pump zone includes a large drain for rapid draining of the unit. Large manways, 16" diameter, are provided in each section for maximum ease of access.
Pumps are stilt mounted with adjustable legs. Pumps are fitted to the unit using flanges, then removing for shipping.

CONTROLS
All motors to be 230/460 volt, 60 Hz, 3 phase, Totally Enclosed Fan-Cooled energy efficient type.

INSTALLATION
Precision Diversified Systems to provide: Pasteurizer pre-plumbed
Purchaser to provide:
Water in
Water drain
Steam - Quote is based upon 80 PSI steam

PASTEURIZER OPERATING PARAMETERS
Container Size/Speed:
12 oz. @60 CPM
Pasteurizer Sq/ft:
144
Pasteurizer Dimensions:
4’ x 36’
Product In Temperature:
37°F - 145°F, hold 3 min.,
cool to 100°F 5.Process Time
40 min.

Price: $95,000


Picture 1

Picture 2

Picture 3

If you would like to be notified when a new listing is posted, please enter your email below.

 North American Brewing Services Newsletter

* Your Email Address:

* Preferred Format:


 



 
© 2000-2001 Content & Info NABS All rights reserved.