Inline Can Filling System

INLINE CAN FILLING SYSTEM (MODEL ICFS-6-1)
Capacity 1800 CPH@ 355 ml (30 CPM)

Infeed Dump Table

• Stainless Steel Construction
• Can single filer
• Height adjustablility

Gravity Twist Rinser

• Easily adjusted to different can sizes
• Multiple full spray rinsing nozzles
• Stainless Steel Construction

Six Station Inline Filler

• CO2 pre-purge
• Product fill with auto-leveling
• Stainless Steel Construction
• Optional Counter pressure filling heads

Can Lid Dispensing System

• Infeed Carriage
• Lid separator
• Lid dispenser system
• Stainless Steel Construction

Single Station Dual Seamer

• Can lift cylinder
• Motor driven inner die
• Double outer seamer
• Simple adjustability
• Stainless Steel Construction
• After initial adjustments are made, our seamer system requires very minimal adjustment afterwards.

Control System & Touch Screen Interface

• Stainless steel enclosures
• Siemens PLC
• Maple Systems HMI
• Washdown

Infeed, Outfeed Conveyor & Pack-off Area

• Low friction table top chain
• Side flexing chain for straight or corner conveyor allowing for any layout requirements
• Multi lane pack-off area
• Stainless Steel frames and guide rail

ACCESSORY EQUIPMENT
Manual Can Depalletizer

• Full pallets of empty cans are loaded into the pallet holding area and secured in place.
• Each layer of the pallet can be raised to the height of the Infeed Dump Table
• Top layer of cans is mechanically transfered from pallet to infeed dump table
• Stainless Steel Construction
• Simple, safe and easy to use
• Optional autoamtion upgrades

Counter Pressure Filling Heads

• Sanitary custom fill heads
• CO2 pre-purge
• Counter pressure fill
• Auto leveling
• CO2 snift
• Product Supply Manifold
• Stainless Steel construction
• Fully integrated into PLC and HMI

External Rinse Tunnel

• Exterior spray nozzles designed to completely rinser filled and sealed can
• Easily attached to Conveyor System
• Stainless Steel construction

Can Inverter

• Conveyor line pressure actuation
• Multiple layer plastic construction
• Simple installation

Air Knife & Blow Drier

• Dual blade air knife system
• High air volume blower

Manual Hi-Cone Applicator

• Manual Hi-Cone plastic ring applicator

Automated Hi-Cone Applicator

• System is designed to fit onto outfeed pack-off area
• Cans are indexed into desired configuration (2x2, 2x3 or 2x4)
• Plastic rings are automatically loaded into place from bulk roll
• Rings are placed on cans
• Ringed cans in packs are pneumatically discharged from machine

OPERATING & TECHNICAL PARAMETERS

Can Styleb 202, Aluminum

Can Heights 6” ~ 12”

Closure Aluminum Lid

Fill Heads:
- Stainless Steel and food grade plastic construction
- Auto level detection
- CO2 pre-purge
- Long tube filling technology

Electrical 220 VAC/60 Hz/3 Phase
Other electrical requirements available as required
All electrical components are UL certified and built in compliance with CSA standards and regulations

Pneumatic:
-Oil and Water Free Air Supply at 80-100psi
- SMC and Pneumatics cylinders
- SMC 24 VDC Solenoids and air treatment components

Seamer Stainless Steel construction
- Designed as per Can supplier specifications

Conveyor:
- Solus 3.25” Low Friction Side Flexing Plastic Chain
- SEW/NORD Drive Components
- Stainless Steel Frame Construction
- * Custom layouts available as required

Product Supply 30 ~ 40 psi

Product Temperature Less than 4º Celsius

Price: $